Lumepuhur 1800 mm / 71 in: Electric starter: 18hp Briggs & Stratton V2

6344,00 €
Laos
Tootekood
IB30.10000A
IRONBALTIC
Saadame välja: 17.03.2025 ja 18.03.2025 vahemikus
Lumepuhur 1800 mm / 71 in: Electric starter: 18hp Briggs & Stratton V2
Kuumakse alates 155.42€, valides makseviisiks ESTO järelmaks.

Võta ühendust meie spetsialistiga
 
 
 

Tallinna esindus 

Sõidukid, sõiduvarustus, varuosad
+372 50 72 248
kevin@starmoto.ee
Eesti, Vene ja Inglise keel

 

Järelmaksu või liisingu pakkuja saate valida ostukorvis makset sooritades.
Svea järelmaks   ESTO järelmaks   TF Bank järelmaks   Swedbank liising   SEB Liising   Montonio järelmaks   Inbank järelmaks ja liising

Rohkem infot võimaluste kohta leiate siit.

 

Front mounted winch and rear ball type hitch required for installing the snow blower!

  • Universal telescopic adjustable, strong square tube push frame allows installation to most 4x4 ATV / UTV machines. The push frame is fixed to the rear hitch ball and with the adjustable chains to the ATV front arms. Installation takes 5-10 minutes.
  • 360 degrees rotating wheel carriers with 4” wheels to carry the weight of the snow blower. The ATV or UTV is used only to push the machine.
  • Control panel for ejection tube movement with stop button to shut off the blower engine.
  • Working position and transportation position (set with vehicle fitted winch).
  • Easy to use belt tensioner, fast removal and installation of the clutch belt, if needed.
  • Protective shaft bolts against excess load in rotor shaft movment.
  • Comes with installation and user manuals.
  • Max vehicle length for snow blower installation, measured from hitch ball to front end nose, is 3100mm.
  • VIDEO CLIP: https://youtu.be/6LneCdNec6Q
  • Wider 1800mm / 71 inches body is suitable to use with larger side-by-side / UTV machines.

 

 


Tootja kirjeldus (kui on saadaval):

Snow blower 1800 mm / 71 in: Electric starter: 18hp Briggs & Stratton V2

Front mounted winch and rear ball type hitch required for installing the snow blower!

  • Universal telescopic adjustable, strong square tube push frame allows installation to most 4x4 ATV / UTV machines. The push frame is fixed to the rear hitch ball and with the adjustable chains to the ATV front arms. Installation takes 5-10 minutes.
  • 360 degrees rotating wheel carriers with 4” wheels to carry the weight of the snow blower. The ATV or UTV is used only to push the machine.
  • Control panel for ejection tube movement with stop button to shut off the blower engine.
  • Working position and transportation position (set with vehicle fitted winch).
  • Easy to use belt tensioner, fast removal and installation of the clutch belt, if needed.
  • Protective shaft bolts against excess load in rotor shaft movment.
  • Comes with installation and user manuals.
  • Max vehicle length for snow blower installation, measured from hitch ball to front end nose, is 3100mm.
  • VIDEO CLIP: https://youtu.be/6LneCdNec6Q
  • Wider 1800mm / 71 inches body is suitable to use with larger side-by-side / UTV machines.

Rohkem infot